Instructions for installing the projector

To install a projector you need to prepare the following tools:

Step 1: Prepare the types of equipment required:

Prepare the projector line to match your needs.
Signal cable: VGA or HDMI cable or both
Projector mount: Prices are suitable for ceiling distance.
Projection screen in the correct size.
Accessories include:
Plastic junction trough (Also known as wire junction tube)
Power cord to power the projector (talking about the projector here)
Preparation of screws, In case of plaster ceiling, tools are required to manipulate gypsum ceilings, expansion screws for high bar ceilings.
Drilling, screwdrivers, pliers, electrical glue, two-sided glue to stick to jealousy,….
Pylons

Notes before installing:

You need to determine the size of the projection room, you need to determine the distance from the projector to the screen.
In addition to determine the location of the projector to the location of the device transmitting the projection data source (PC, laptop, Android TV box, Head k + ...) to determine the length of the power cord, signal cable.
You need to determine the exact ceiling: Because you need to know the height to choose a bracket for the projector (if the low ceiling can choose 0.6m, higher then 1.2m, more then 1.8m)
how to fit the projector and screen

Step 2: Proceed to install the projector on the ceiling

Once you've selected the screen location and installation, you need to determine the best screen-to-projector position for the frame to project. When you locate the projector, drill 4 holes to secure the projector mount. This you need to measure accurately before drilling. When finished drilling you can use the iron expansion screws available in each ceiling mount kit or you can use the usual plastic expansion screws.
projector installation

Each bracket includes different parts such as: the body of the bracket, all kinds of screws, the projector hanger base, the projector holder ... You install the parts together, do as follows. You can perform the installation in the following order:
Measure and drill holes for mounting brackets.
Assemble the mounting parts together (minus the part that attaches to the projector).
Perform the mounting bracket mounted base on the ceiling, you perform screw tightening as well as check the safety.
Then install the rack on the projector, then hang it on the rack you captured (It can be done after the following steps are complete).
projector installation

Note: You need to install the two above parts separately, after installing part 2 fixed on the ceiling, then hang the device on a shelf.

projector installation

Next, you stick the prepared gene trough on the ceiling and wall according to the right path to pass signal wires and wires. You need to select carriers that are large enough to accommodate electrical wires and signal wires. You then use the small expansion screws to fix the gen gutters on the walls and ceiling. You run the wire into the genome and close the lid to deliver the gene.
For plaster ceilings, you need to take care not to damage the plaster ceiling.
projector installation

Step 3: Install and adjust the projector accordingly for best image quality

Once the set is set, start up the projector to start playing. Of course we need to adjust the frame as well as the parameters to bring a frame with the most desired image.

cafe projector

After the jealousy, wire, power and signal steps are complete, we begin to follow the next steps to complete the installation.

Connect the power and signal supply cables to your projector.
Proceed to restart the projector. If you can project images, the better.
After connecting the power supply and the cable connecting to the data source device, we proceed to the slide show. You should see the image reversed, as we hung the projector upside down from the ceiling. The projected frame is also distorted in a trapezoidal pattern. Now we make settings and adjustments to achieve the desired slideshow frame.